Products
Playground Sets
Playground sets with wooden, metal and composite structures — slides, climbing units, swings and tunnels.
Send us your area dimensions and we will return suitable models with specifications and pricing the same day.
A children’s playground set is a multi-unit system combining towers, slides, climbing elements and bridges on one structural frame. The Park Misa catalogue holds 89 models across 12 series. Model choice follows the site dimensions: the safety area to be left clear around a unit is markedly larger than its ground footprint, and the layout must be built around that figure. Drop height in turn determines the thickness of the impact-absorbing surfacing beneath.
Nature Series
DEV 02 Playground Set
Nature Series
DEV 09 Playground Set
Nature Series
DEV 16 Playground Set
Status Series
TIME 01 Playground Set
Status Series
TIME 02 Playground Set
Status Series
TIME 03 Playground Set
Status Series
TIME 04 Playground Set
Status Series
TIME 05 Playground Set
Status Series
TIME 06 Playground Set
Little Dreams Series
KD 02 Playground Set
Little Dreams Series
KD 03 Playground Set
Little Dreams Series
KD 04 Playground Set
Little Dreams Series
KD 05 Playground Set
A playground set is the multi-unit system at the centre of a play area, combining towers, platforms, slides, climbing elements and bridges on a single structural frame. Our catalogue holds 89 models across 12 series, separated by material (timber, metal, composite) and design language.
What decides the choice is dimensions, not looks. Every model carries four figures: drop height (the highest free fall point), peak height (overall height), footprint (the footprint on the ground) and safety area (the total clear space required around the unit). Site planning must follow the safety area, not the footprint — confusing the two either leaves the unit not fitting or breaches the clearance.
Drop height also determines the surfacing. The greater the height, the thicker the impact-absorbing layer beneath — so equipment and surfacing must be decided together. Choosing the set first and leaving the flooring for later is the most common source of budget surprises.
Age group narrows the choice further. Younger children need low platforms and short slides; older children are better served by climbing and balance courses. Where one area serves both, separating the units is safer than installing a single mixed-age structure.
Frequently asked questions
How much space does a playground set need?
What matters is the safety area, not the unit’s own footprint. Across our range this runs from roughly 720 × 720 cm to 1680 × 1510 cm, and it is tabulated on every product page. Send us your area dimensions and we will list the models that fit.
Why does drop height matter?
Drop height determines the type and thickness of the impact-absorbing surface beneath the equipment. The higher the fall, the thicker the rubber required — which is why equipment and surfacing must be planned together.
Should I choose timber or metal?
Timber blends into green areas and needs regular maintenance. Metal and composite frames carry a lower maintenance load and offer more colour options. In salty, humid coastal settings the quality of the metal coating becomes decisive. Tell us where the site is and we will advise.
Are delivery and installation included?
Yes. Transport, surfacing and assembly are carried out by our own team, with no intermediaries. These items appear separately on the quotation.
Can you quote against a municipal tender specification?
Yes. We identify suitable models against the dimensional, material and standards clauses in the specification and prepare the technical file. Just send us the document.